How to Blow In Attic Insulation

October 3rd, 2012

Energy rates and costs have gone up considerably in the past few decades. So, needless to say, you are constantly looking for ways to cut down on energy bills. One practical way to economize is by going for proper insulation of your attic. Most homes have lofts or attics that have vents and leaks around ducts, chimneys, and ceiling recesses that do not allow proper ventilation. As a result, the rooms become very hot during the summers and bitterly cold during the winters. The best way to plug all vents, gaps and cracks in the loft is by resorting to blow-in insulation with cellulose. You can carry out the insulation yourself by following a DIY guide on how to blow in attic insulation but will tire out completely. Moreover, since the entire process is very dusty, you might have allergic attacks if you are susceptible to dust mites. Then again, you’ll have to set aside at least two days and need helping hands to carry out the entire process. Opting for professional help is always a better option. Since professionals are specialists in doing such type of jobs, your attic insulation will be done efficiently. Blow-In Attic Insulation is a two stage process   The investments that you will have to make for doing the insulation job yourself might work out to be same as engaging a professional for doing the job. You will of course not have to pay yourself for the labor costs but the amount that you’ll have to spend for procuring the tools and materials might be more than what you’d have to pay for hiring a professional. A professional will also do the job more thoroughly that will bring down your energy bills by 15% to 20%. The entire mechanism of how to blow in attic insulation is actually a two stage process. The first stage involves taking proper measurements of your attic (the prescribed R-value) and then procuring the tools and materials. The second stage involves the actual process of blow-in attic insulation. A professional, undoubtedly will handle the insulation project more effectively than you can. The tools and materials that you’ll need for the project Before the professional can get started with the how to blow in attic insulation project, he’ll need to ensure that he has all the tools and materials ready like caulking gun, blower machine, insulation material, dust mask, duct tapes, enlarging foam spray, and vent slides. Sometimes, the attic insulation company might offer you a free tool like an insulation blower or extra bags of cellulose if you purchase your entire needs from one outlet. As a thicker insulation ensures better protection against the vagaries of weather, the extra cellulose will come handy. Getting on with the installation In the first step, one end of the hose is fixed to the blower and the other end is taken up by the worker to the loft. Next, he ensures that the hopper of the insulation blower does not contain any foreign bodies. A grate above the blowing apparatus is put for safety. Thereafter, the cellulose is pulverized and fed into the machine. Someone has to stand midway between the blower and the attic for listening and passing instructions as it can get very noisy during the operation. The hopper door is kept ajar while cellulose is fed into the machine. The insulation material is sprayed evenly from one end of the attic and uniform coating is applied throughout. See to it that the coating is dense enough to qualify for the R-Value you’re seeking to attain. The professional is done with the project on how to blow in attic insulation even before you know it.