Make Your Toronto Home Energy Efficient with Attic Insulation

July 18th, 2012

Don’t you just hate the cold damp feeling you get when you walk into the attic? The attic usually tends to get much colder than other rooms because of its position in the house and also because most attics are made of wood, which is a good insulator of both heat and cold. However, chilly attics are a thing of the past, as attic insulation in Toronto has become a popular concept amongst homebuyers. Proper attic insulation also makes the house more energy efficient. In fact, the lack of insulation has resulted in unnecessary loss of energy in homes thereby increasing carbon emissions. Benefits of Attic Insulation Toronto
  • Attic insulation can stop up to 97% of energy loss
  • It protects your home from mildew and condensation
  • It helps in reducing the carbon footprint and makes your home energy efficient
  • It doesn’t wear out its utility and doesn’t require replacement
  • It requires very low maintenance and works out to be cost effective
  • It is a safe investment and the benefits are evident in a short span of time
  • It adds value to your home and provides safe and comfortable living for your family
Function The ‘R-value’ (resistance) is the measure of insulation and how well the flow of heat is controlled. It is a vital aspect to consider for attic insulation in Toronto. The recommended R-value is R-60 in Canada. The higher the ‘R’ number, the better insulation you will have. For this sort of high ‘R’ value insulation, the fibreglass should have a thickness of 10-14 inches. Features Attics are installed with fiberglass batts. They are functional because they trap air in their thin glass fibers to control flow of the heat. These look like thick blankets and are custom made to fit between floor and roof joists and the beams that hold up the walls of the attic. Fiberglass insulation can be done in two ways – one is loose-fill and another is blown-in. Fiberglass is easy to handle and install. Another material used for attic insulation in Toronto is cellulose fiber. It is made of ground up newspaper and is exposed to fire resistant substances. This material offers better insulation because it is grounded into tiny particles that makes it easier to be blown into small corners of the attic. It is seen that countries experiencing cold climes like Canada go for cellulose loose-fill insulation, which is perfect for attic insulation. Do’s and Don’ts of Attic Insulation
  • Seal all the air leaks and duct any exhaust fans. The attic should be airtight.
  • If the attic sealing is stained or has watermarks make sure it’s repaired, as insulation is ineffective in damp conditions.
  • Don’t block any ventilation vents in the attic.
  • Use foam strips or form boards to cover the small and large gaps.
Keep these things in mind when hiring an attic insulation Toronto contractor for getting the best value from the attic insulation services.